Model: | SK117 |
Category: | Ring load cell |
Capacity: | 10,20,30,50,100,200,300kN |
Rated Output: | 1.5±10%mV/V |
Material: | Stainless steel |
Product Orgin: | China |
The load cell can be customised for capacity, accuracy, dimension and other parameters. |
SK117 Large Capacity Donut Force Sensor is a commonly used force transducer that can be used to measure axial force and pressure. The sensor usually consists of a ring elastomer and a piezoelectric transducer that converts the force acting on the sensor into an electrical signal. Ring force sensors are very simple to install. They can usually be connected to the test system by means of threads or flanges, for example, for quick installation and replacement. Annular force transducers are used in a wide variety of industrial applications. They are commonly used in mechanical testing, materials research, engineering machinery, aerospace and automotive industries to measure and monitor different types of forces and pressures.
Specifications | Technique |
Capacity | 10,20,30,50,100,200,300kN |
Rated output | 1.5±10%mV/V |
Zero balance | ±0.03 mV/V |
Non-linearity | 0.1%F.S. |
Hysteresis | 0.1%F.S. |
Repeatability | 0.05%F.S. |
Temp.effect on output | 0.05%F.S./10℃ |
Temp.effect on zero | 0.05%F.S./10℃ |
Input impedance | 780±20Ω |
Output impedance | 700±10Ω |
Insulation | ≥5000MΩ/100VDC |
Recommended excitation | 5~15V |
Maximum excitation | 20V |
Compensated temp range | -10~60℃ |
Operation temp range | -20~80℃ |
Safe overload | 150%F.S. |
Ultimate overload | 200%F.S. |
Cable size | φ4×3000mm |