Model: | SK109 |
Category: | Ring load cells |
Capacity: | 50,100,200,500,1000N |
Rated Output: | 1.5±20%mV/V |
Product Orgin: | China |
The load cell can be customised for capacity, accuracy, dimension and other parameters. |
SK109 Ring load cell is made of stainless steel and is used for pressure or in-line compression measurements. The most common application is to mount the SK109 between a bolt head and a nut to measure the clamping force of the fastener when torque is applied. The annular force transducer is available in measuring ranges from 50N to 1000N and the washer type load cell can be modified or customised according to your requirements.
Specifications | Technique |
Capacity | 50,100,200,500,1000N |
Rated output | 1.5±20%mV/V |
Zero balance | ±5%mV/V |
Non-linearity | 0.50%F.S. |
Hysteresis | 0.20%F.S. |
Repeatability | 0.20%F.S. |
Temp.effect on output | 0.05%F.S./10℃ |
Temp.effect on zero | 0.05%F.S./10℃ |
Input impedance | 700±10Ω |
Output impedance | 700±10Ω |
Insulation | ≥5000MΩ/100VDC |
Recommended excitation | 10V |
Maximum excitation | 15V |
Compensated temp range | -10~60℃ |
Operation temp range | -20~80℃ |
Safe overload | 150%F.S. |
Ultimate overload | 200%F.S. |
Cable size | Φ3×3m |
Material | Stainless Steel |