SK205 Pull Push force transducer uses metal foil strain gauge technology to output 1.5mV/V from a full Wheatstone bridge bonded to an aluminium specially machined structural part. The Tension pressure sensor offers six rated ranges of 0-500N / 0-1KN / 0-1.5KN/ 0-2KN / 0-3KN / 0-5KN for traction and compression force measurements.The M8 threaded holes at both ends can be used to install accessories such as ring bolts and hooks to meet different application requirements.
Specifications |
Technique |
Capacity |
0.5,1,1.5,2,3,5kN |
Rated output |
1.5±10%mV/V |
Zero balance |
±0.05mV/V |
Non-linearity |
0.20%F.S. |
Hysteresis |
0.10%F.S. |
Repeatability |
0.10%F.S. |
Temp.effect on output |
0.05%F.S./10℃ |
Temp.effect on zero |
0.05%F.S./10℃ |
Input impedance |
700±10Ω |
Output impedance |
700±10Ω |
Insulation |
≥5000MΩ/100VDC |
Recommended excitation |
5~15V |
Maximum excitation |
20V |
Compensated temp range |
-10~60℃ |
Operation temp range |
-20~80℃ |
Safe overload |
150%F.S. |
Ultimate overload |
200%F.S. |
Cable size |
Φ4×3000mm |